BRANOrost Chips are saturated with the premium VCI quality of BRANOpac and give excellent cushion and scratch protection for metallic components and surfaces. BRANOrost chips combine protection against damage and corrosion.
By emitting constantly a small amount of active anticorrosion substances (VCI principle: Volatile Corrosion Inhibitor), BRANOrost Chips help to protect metal parts during transport and storage.
In packages or containers lined with BRANOrost Chips, a protecting atmosphere is built up, which reliably prevents corrosion of metal parts even after having opened the package for a short time. BRANOrost Chips have a repository effect.
BRANOrost Chips are lined in packages or adhered to hollow spaces with thick outer walls. The better the outer seal, the longer the protection will last.
According to your application, BRANOrost Chips are available in three different performances.
BRANOrost Chip R（contains nitrite according to TRGS 615）
Protects steel, chromium, tin, pure aluminium and cast iron.
BRANOrost Chip U（nitrite free）
Protects steel , cast iron ( only on contact ) , zinc, chromium, copper, brass, bronze, pure aluminium and tin.
BRANOrost Chip M（nitrite free）
Protects steel, chromium, tin, pure aluminium and cast iron (only on contact).
※ For further questions about metals and alloys, our technical support will assist you.
· Environmentally friendly corrosion protection based on paper
· Package and anticorrosion protection in one
· Metal parts are ready for use immediatly
· Time efficent packaging process
· Easy to dispose and recyclable
· Non-hazardous material
· BRANOpac is certified according to ISO 9001 and ISO 14001
· Development of customized solutions possible
Customer oriented in roles, sheets, bags, covers and blanks.
The metal is to be packaged clean, dry, corrosion-free and without remnants from earlier process steps. The denser the outer package, the more permanent is the protective effect.
BRANOrost Chips products are marked with the Resy label and can be recycled in a material -or thermal utilisation. If such utilisation is not technically possible or reasonable, the material can, in accordance with local official regulations, be disposed of with domestic refuse or burned.
BRANOrost Chips corresponds to TRGS 615. Please see for further information the safety information sheet.
Storage and Duration of Protection
Should be stored cool and dry, protected from direct sunlight. Shelf-life in the original packaging up to three years.
For metal parts packaged with BRANOrost Chips, depending on the climatic conditions and closeness of package, the term of protection can be up to three years.
|Protection Capacity||Size||Protection Capacity||Size|
|0,1 L||10 x 10 mm||25,0 L||100 x 120 mm|
|0,2 L||15 x 15 mm||80,0 L||170 x 240 mm|
|1,0 L||30 x 30 mm||125,0 L||245 x 250 mm|
|2,0 L||43 x 43 mm||250,0 L||250 x 490 mm|
|2,5 L||50 x 50 mm||500,0 L||490 x 500 mm|
|5,0 L||71 x 71 mm||1000,0 L||490 x 1000 mm|
BRANOrost VCI-products are to be used as described application/packaging advice. Otherwise, no responsibility for caused damages can be taken.
The information given is in line with current state of knowledge. It is non-binding and might have to be adjusted to meet local requirements. No liability is accepted for this information. Please contact us in case of doubt.